Carli Suspension - Ford F250/350 2020+, 3.5" or F250/350, 2017-19, 2.5" Lift - 2020+ 4x4 Diesel, Base Kit (CS-FLVL-SIG-17)

Carli Suspension - Ford F250/350 2020+, 3.5" or F250/350, 2017-19, 2.5" Lift - 2020+ 4x4 Diesel, Base Kit (CS-FLVL-SIG-17)


$1,600.00

SKU :210000008691 (CS-FLVL-SIG-17)


/
Shipping calculated at checkout.
  • Shipping or Pick Up in Store Available
  • Available Monday - Friday 9AM - 6PM PST
  • Need Installation? Contact Us


DESCRIPTION

*West Coast Off-Roaders is your Canadian distributor for Carli Suspension in Canada and can provide expert advice on what would be the ideal setup for your specific needs. For stock availability, prices and recommendations on kit options as well as shipping or installation services, feel free to contact us through our contact page* 


3.5" Lift - 2020+ F250/350 4x4 Diesel, Base Kit
2.5" Lift - 2017-19 F250/350 4x4 Diesel, Base Kit 

Base Kit Includes:

CS-FLC-05 Front Leveling Coils
CS-FSIG20SPKG-FRONT-LVL-05 Ford Signature Series FRONT Shock Package, LVL
CS-FORDBBL-LVL-17-F Front Brake Lines
CS-FCASTERSHIM-25 2° Caster Shims
CS-FBDF-25-17 High Clearance Bump Stop Drops, Front

The Leveling System was designed for people seeking a leveled vehicle with more performance and ride quality than a generic spacer lift. The included, front, Carli Signature Series Shocks are longer to accommodate the extended travel. When designing the shocks, Zinc plating, Clear Coat for corrosion resistance and quality bushings were a must; finished off with boots to protect the shafts, Carli back them with a limited lifetime warranty to ensure their quality is as unbeatable as their ride quality at this price point.

The truck will sit 2.5” higher in the front and have more wheel travel thanks to the lighter rate Carli Coil Springs. Extended, Stainless Brake Lines firm up braking and ensure there is enough line for the newfound travel. To round off the front end, Carli include Caster Shims to tighten the steering. Carli recommend adding an Adjustable Track Bar to center the front axle; for those that do not wish to, Carli include our High-Clearance Bump Stop Drop to keep the springs clear from the contacting the factory bump stop given the slight driver’s side shift of a leveled Super Duty without a track bar.  The front Sway Bar Geometry will need to be addressed with your choice of a Sway Bar Drop Bracket (more economical, maintains the factory Sway Bar End Links) or our Extended Sway Bar links – a FAR more robust option. The replacement End Links are the only option compatible with a plow bracket.


The front will sit level to the rear and payload is maintained as the rear springs are unaltered in this system.

Wheel and Tire: Factory Wheels SHOULD NOT be run with oversized tires. They’re known to rub the radius arm, sway bar and most concerning – Brake Lines. Factory tires and factory wheels will work without issue but Carli DO NOT recommend running oversized tires on factory wheels. On our 2.5” Ford Systems, Carli recommend 17”-18” wheels, no more than 9” wide with 5.5” of backspacing with Carli Fabricated Radius Arms or 5” Backspace with factory arms; 5” will require a bit more trimming. Tires, 37×12.5” will fit with some trimming; 35” will likely fit without trimming. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. 


Product Notification

  • We carry the full range of products from all our suppliers. If you don’t see it on our website, contact us and we will order it for you.
  • Not sure if this product is the best fit or option for your vehicle or adventure? Get in touch, we understand the the pros and cons of each product and are happy to help.
  • Buy right the first time - we can help you avoid making costly mistakes
  • Contact Us >

You may also like


Recently viewed