Air Lockers and Compressors

ARB's new CKMTA12 and CKMTA24 twin on-board compressor kits were designed to fill the market need for a compact sized yet high-volume compressed air source to suit the high volume airflow needs of most air powered tools, and also to suit the actuation and control needs of the ARB Air Locker, and the harsh and demanding environment of the ARB Air Locker user.

Applications:

• Pneumatic supply and electrical control for ARB Air Locker(s). (Air Locker Manifold Kit #171503 required)
• Rapid inflation of small, medium and large tires.
• Air tools rated up to 85LPM [3CFM] @ 6Bar [90PSI] continuous supply.
• Air tools rated higher than 85LPM [3CFM] @ 6Bar [90PSI] using an optional air tank suitable to the run time requirements.

Kit Includes:
• Fully assembled and tested air compressor (12V or 24V).
• Complete wiring loom w/ Air Locker solenoid plug-in terminals.
• Automotive OEM quality compressor isolating switch.
• 2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges.
• Mounting bolts and washers.
• Comprehensive photo illustrated installation guide.

Optional Accessories:
ARB offers a range of accessories to help maximize the potential of your on-board compressor installation.

• 170631 - JIC4 [AN-4] male to 1/4NPT male adapter nipple
• 171301 - 6m [20ft] high temperature inflation hose with m/f US std air couplings
• 171302 - Pump-up kit for hard mounted tyre inflation
• 171309 - Compressed air blow gun to suit US std air coupling
• 171501 - 4 Liter [1 Gallon] forged aluminum air tank (JIC4 port x 2)
• 171503 - Complete manifold kit to suit Air Locker solenoid mounting
• 180103 - 12V electric solenoid (1/8BSPP ports x 2)
• ARB605US - Inflation/deflation gauge (stainless braided, lock-on)
• ARB606 - Tire inflator wand (long reach, push-on)
• ARB607 - Tire inflator chuck (angled, lock-on)
Features:
• Available in 12V (CKMTA12) or 24V (CKMTA24) models.
• Constructed primarily of light weight, high strength, engineering grade
materials, including military and aerospace standard components.
• Pressure switch controlled air manifold system regulates pressure between 9.3Bar [135PSI] and 10.3Bar [150PSI] suited to air tools and all ARB Air Locker equipped vehicles.
• Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
• High efficiency design consumes only 56 Amps at maximum air flow.
• Built with sealed components for moisture and dust resistance.
• Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon
fiber piston seals for reduced friction and maximum trouble free life.
• Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).
• Anti-vibration / sound deadening is integrated into the mount.
• Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning.
• High density and high flow washable sintered bronze air filter elements.
• Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
• Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
• Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
• Motors are internally thermal protected against extreme temperature damage.
• Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing.
• Over-pressure safety valve equipped.
• Sealed illuminated automotive grade dash switch included.
• Fully serviceable and all replacement parts available.
• EMF suppressed for use in proximity to sensitive electronic equipment.
• CE and C-Tick compliant.
• Engineered, built, and individually dyno-tested in Australia from local and imported components.

The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.

Features:

• Corrosion Resistant Brass/Stainless Deflator Tool
• Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude
• Fully Geared, Solid Brass Precision Movement
• Protective Rubber Gauge Guard
• Easy to Read Dial with One PSI Increments
• Thoroughly Designed and Tested to Ensure Accuracy
• Includes Protective Canvas Pouch and Instruction Sheet

An ARB air pressure gauge is the ideal way to accurately measure your tires' PSI when you're making adjustments for off road conditions.

Features:

• Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude
• Fully Geared, Solid Brass Precision Movement
• Protective Rubber Gauge Guard
• Easy to Read Dual Pressure Scales - PSI and Bar
• Thoroughly Designed and Tested to Ensure Accuracy
• Flexible Hose with Dual Chuck for All Rim and Valve Types
• Gauge Reset Button

Specifically designed for off road use, this gauge incorporates a lower scale for improved accuracy at lower pressures.

Features:

• Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude
• Fully Geared, Solid Brass Precision Movement
• Protective Rubber Gauge Guard
• Easy to Read 3.5" Diameter Gauge
• Three Pressure Scales: PSI, KPA and Bar
• Thoroughly Designed and Tested to Ensure Accuracy
• Flexible Hose with Dual Chuck for All Rim and Valve Types

Due to the incredible air-output produced from the Hi-Output CKMA12 compressor, this air compressor requires a unique, high-heat tolerant hose, specially sourced from Japan. Designed by ARB engineers for maximum air flow this Tire Inflation Kit also includes a dust free air chuck, which boasts an enclosed internal bearing system to prevent dirt ingestion.
Air up quickly with the ARB Tire Inflation Kit!

Designed to be matched with the hard mount ARB Twin Air Compressor (CKMTA12), this tank in combination with the twin compressor allows the use of air tools while in remote locations. 

 

Features:

• Forged Aluminum
• 1 Gallon (4 Liter) Capacity
• JIC4 ports (x2)
• Compatible with ARB Air Compressor models CKMA12/CKMA24/CKMTA12/CKMTA24
• 6.5"W x 6.5"H x 10"L

This portable 12V air compressor comes in a durable polypropylene carry case for added versatility and uses quality components for quiet operation and extra long life. Including a 19ft air hose, it also comes with all the necessary fittings for tire inflation and camping or leisure gear.

ARB’s new CKMTP12 twin portable air compressor was designed to fill the market need for a compact sized yet high performance compressed air source for rapid inflation of large tyres as well as the high volume air needs of most air powered tools. The ARB CKMTP12 is a world class recreational product designed and built to commercial/industrial standards to survive harsh and demanding outback conditions.
FEATURES:
• Ultra compact twin motor, dual cylinder design makes this the highest flowing portable compressor of its size on the market at 6.16 CFM at 0 PSI.
• Integrated aluminium air tank and pressure switch regulates pressure between 930kPa [135PSI] and 1030kPa [150PSI] which is suited to most air powered tools.
• Mounted in a waterproof carry case constructed from a durable impact resistant polymer. The carry case has convenient compartments for storing the air hose and other compressor accessories.
• Ducted IP55 sealed brushed DC cooling fan and anodized aluminium motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).

Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug in contacts, mounting hardware with reinforcing bracket and quality compressor isolating switch. This compressor, with the addition of ARB Pump-Up Kit (part #171302) can be used to activate air lockers, and can perform other functions such as inflating camping gear.
So what makes this compressor special? It's small enough to fit into even the tightest space and quiet enough to mount in the cab. It has enough output to air up four 35" - 37" tires in a single duty cycle and typically airs up a 35" tire in just over two minutes. And, it works. We've tested this unit in ovens, freezers, underwater and in the silty dust of the Simpson Desert and it continues to perform.

Kit Includes:
• Full assembled and bench tested air compressor
• Complete snap together wiring loom
• OEM quality compressor isolating switch
• Air Locker™ supply rated pressure switch
• Relocatable splash resistant air filter with washable high-flow sintered bronze filter cartridge
• Mounting hardware with reinforcing backing plate
• Comprehensive photo illustrated installation guide
Optional Accessories:
• Full assembled and test air compressor
• OEM quality compressor isolating switch
• Air Locker™ supply rated pressure switch
• Relocatable splash resistant air filter with washable high-flow sintered bronze filter cartridge
• Mounting hardware with reinforcing backing plate
• Comprehensive photo illustrated installation guide
Features:
• Compact design makes it the highest flowing compressor in its class (voltage vs size)
• Fully sealed components for moisture and dust
• Pressure switch controlled air manifold systems specially designed to suit ARB Air Locker™ equipped vehicles
• Hard anodized cylinder bore and PTFE (Teflon) impregnated carbon fiber piston seal for reduced friction and maximum trouble free life
• New anodized mounting bracket dissipates motor heat and allows compressor to be repositioned 180°
• Anti-vibration/sound deadening mount
• Relocatable splash resistant air filter assembly for cleaner, cooler air supply
and versatile waterproof air intake positioning
• High density, high flow washable sintered bronze air filter element
• Maxi-Fuse equipped for professional in-line circuit protection
• Motor is 100% ball bearing equipped with unique linear brush pre-load system for extra long life, low heat and quiet operation
• Compressor piston is equipped with a German made high shock rated cylindrical roller bearing
• Constructed entirely of light weight, high strength engineering grade materials, including military and aerospace grade components
• Over-pressure safety valve equipped
• Motor is internally thermal protected against extreme temperature damage