Carli Suspension - RAM 3500, 2019+ 2.5" Leveling System, Diesel, Carli-SPEC (CS-DLVL-CS-19-D)

At West Coast Off-Roaders we pride ourselves in giving you the best advice to ensure that you purchase the right product to suit your specific needs, as well as ensure that it is the right fit or application for your vehicle. For expert advice, pricing, shipping and an accurate ETA, please give us a call on 604 770 1252 or contact us via the contact page on this website.    

OVERVIEW

In 2019, Ram lowered the rear of the 3500 SRW - for this reason, Carli is now providing a 1" Billet Block and U-Bolts to fit the larger AAM 12" Axle (4.25" Axle Tubes). If you have a 19+ DRW, you do not need the 1" block to achieve a level stance - order the 13-18 option, instead. 

• 2019+ 3500 SRW
• 2019+ 3500 DRW, use other option (CS-DLVL-CS-13-D) with NO BLOCK
  

Base Kit Includes:

*Does not work with rear auto-level air suspension. This system is tuned for the 3500s equipped with rear leaf springs. It will install on the 3500  trucks equipped with the factory auto-leveling air assist but the tuning is NOT refined to the platform. Carli recommend you measure the truck as it often takes less than 2.5″ of front lift to level the Air-Assist Rams.* 

Options Available:

- Adjustable Track Bar
- Torsion Sway Bar
- Radius Arm Drop Bracket
- Leaf Spring Shackle
- Low Mount Steering Stabiliser
- High Mount Steering Stabiliser
- Fabricated Radius Arms
- Front Differential Guard
- Lifetime Ball Joints

Description:  

This system is designed for the customer that keeps their truck on the road with an eye for quality and appreciation for bang-for-their-buck. Utilizing Carli SPEC 2.0″ Diameter, Internal Reservoir shocks, we’ve developed a tune that delivers all-around comfort and ride quality designed for on-road, in town, highway, and towing/hauling. The 2.5” lift height doesn’t require the front or rear geometry correction of our 3” Systems.

At the heart of this system is a 2.5” lift, Linear Rate Coil Spring paired to matched travel mono-tube, internal reservoir, Carli SPEC 2.0. These shocks boast 6063 Aluminum construction, anodized body for corrosion resistance, 5/8″ hardened steel chrome plated shaft, full serviceability & rebuildability and are built with 1-peice bushings in the 6061 billet rod-ends. These shocks are spec’d with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation. Carli back these with a 1-year warranty, serviced by Carli. 

In 2019, Ram lowered the rear of the 3500 trucks – for this reason, Carli are now providing a 1″ Billet Block and U-Bolts to fit the larger AAM 12″ Axle (4.25″ Axle Tubes). As the rear springs remain unmodified aside from the lift block, load capacity is maintained while predictability is improved. For those that aren’t looking for massive increase in travel or big shocks but still desire a level stance and improved ride quality and handling characteristics, this is the perfect kit. The 2.5” lift height doesn’t require the geometry correction of our 3” Systems.

The front axle will be slightly pulled to the Driver’s side following installation of the lift; this can be corrected with the addition of our Adjustable Track Bar. Further, ride quality can be substantially increased with the addition of our Torsion Sway Bar. Carli recommend a 35” tire on a wheel that’s no more than 9” wide with 5.5”-6” Backspace. An 18” diameter wheel will be best to ensure optimal ride quality (more rubber = better small bump compliance) and an unloaded tire pressure of 45F/40R is recommended. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.

**This system will NOT be upgradeable to any other Carli Suspension Systems.** It’s designed to be a solution for customers wanting a quality system with minimal lift and part inclusion. Carli recommend slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops. For this reason, customers may experience a slight bow in the coil spring. Carli did not experience a coil bow in any of our test trucks but it’s possible at the 2.5” lift height without a Radius Arm Drop Bracket.

This system is NOT compatible with trucks equipped with the factory auto-leveling air assist.