AEV - 2.5″ – 3″ Dualsport RT Suspension For 2019+ Gladiator JT, Eco Diesel, High Capacity Coils (N0922405AA) Media 1 of 1

AEV - 2.5″ – 3″ Dualsport RT Suspension For 2019+ Gladiator JT, Eco Diesel, High Capacity Coils (N0922405AA)



/
Shipping calculated at checkout.
Only 0 items in stock!
** Limited Quantity Available **
  • Shipping or Pick Up in Store Available
  • Available Monday - Friday 9AM - 6PM PST
  • Need Installation? Contact Us


DESCRIPTION

At West Coast Off-Roaders we pride ourselves in giving you the best advice to ensure that you purchase the right product to suit your specific needs, as well as ensure that it is the right fit or application for your vehicle. For expert advice, pricing, shipping and an accurate ETA, please give us a call on 604 770 1252 or contact us via the contact page on this website.    


------------


AEV’s first step in designing the expedition-ready, JT 2.5″ DualSport RT Suspension System for Jeep Gladiator was understanding the shortcomings and limitations of the OEM suspension package.

The Gladiator’s factory suspension (especially on Rubicon) is very soft, lightly damped and has a very low suspension frequency. This “soft tuning” helps the Gladiator drive “less like a truck” and soak up the bumps on the highway decently well but that can also make the handling feel a bit loose and sometimes uncontrolled. This is not a big deal for people who are just driving their Gladiator to and from work every day, but it is definitely not the ideal suspension formula for overland enthusiasts who also need to manage lots of cargo and gear when traveling off the grid.

As with all of AEV’s expedition-ready suspension systems, coil spring and shock tuning was essential on the Gladiator system to provide the optimal balance of load carrying capacity and ride quality that customers have come to expect from AEV. The DualSport RT Suspension System includes a set of their frequency-tuned, triple-rate coil springs to provide 2.5-3” of additional front and rear ride height. 

Customers can now fine tune their 2.5-inch leveling kit for Jeep Gladiator, even further by choosing one of two available coil spring options:

2.5” Standard Load Coil Springs are optimized for an AEV-spec Gladiator with typical gear/cargo inside. This means the ideal ride height, handling and overall performance will be achieved on a vehicle with steel bumpers, winch, full-size spare and recovery gear (+0-400 lbs. over factory weight).

3” High Capacity Coil Springs are specifically designed for overland enthusiasts who have a fully outfitted vehicle that is also consistently loaded with heavier gear (+400-700 lbs. over the standard load spring), such as modular cargo systems or roof rack/rooftop tent combinations*

These coil springs are then paired with a set of AEV-tuned, 46mm Bilstein 5100 series shock absorbers for a slightly sportier and more controlled feel. The AEV/Bilstein coil spring and shock combination used in this suspension increases both up travel and down travel, while also providing better articulation and improved off-road speed potential and bottoming control. Even when towing, the suspension feels stable, planted, and confidence inspiring.

AEV then optimized the Gladiator’s front and rear suspension geometry throughout the entire range of motion, tightening up the handling and road feel, resulting in a great ride and performance without introducing harshness or driver fatigue. In the front, a pair of AEV’s heavy duty, stamped control arm geometry correction brackets are included for improved ride quality and reduced nose-dive under hard braking. A rear track bar tower extension is included to raise the rear roll center, reduce body-roll and generate a better turn-in response. Extended length front and rear sway bar end links compensate for the additional lift height, while new front and rear bump stop spacers improve bumper/axle contact under full articulation and jounce. Due to this suspension system’s lower lift height, there is no need to swap out any of the OE track bars, control arms or steering components.

AEVs ProCal Snap is included for quick and easy speedometer recalibration, as well as their JL/JT Jack Base for added safety and stability when changing a 35” and taller tire with the factory scissor jack.  

This Jeep Gladiator suspension lift kit is proudly made in the USA and features AEV’s Lifetime Warranty.

Maximum recommended tire sizes* 

• Sport/Overland (North America): 35×12.50R17
• Rubicon (North America): 37×12.50R17
• Sport/Overland/Rubicon (Export): 35×12.50R17

TECH SPECS:


Application
: 2019+ Jeep Gladiator (Excluding Mojave)

Components: AEV 2.5" Progressive Rate Front & Rear Coil Springs (Standard Capacity), AEV 3" Progressive Rate Front & Rear Coil Springs (High Capacity), AEV-Tuned Bilstein 5100 Shock Absorbers, AEV Stamped Control Arm Geometry Correction Brackets, Front Bump Stop Extensions, Rear Bump Stop Extensions, Front Sway Bar End Links, Rear Sway Bar End Links w/ Relocation Brackets, Passenger Side Coil Spring Shim, Rear Track Bar Tower, Rear Driveshaft Carrier Bearing Spacer, AEV ProCal SNAP, AEV Jack Base

Product Notification

  • We carry the full range of products from all our suppliers. If you don’t see it on our website, contact us and we will order it for you.
  • Not sure if this product is the best fit or option for your vehicle or adventure? Get in touch, we understand the the pros and cons of each product and are happy to help.
  • Buy right the first time - we can help you avoid making costly mistakes
  • Contact Us >

You may also like


Recently viewed